幸运农场怎么玩
我們的產品服務于
SGF-1B型數字式鋼鐵材質無損分選器
ZGF-II型智能鋼鐵材質硬度無損分選器
ZGF- Ⅲ 型智能化無損分選器
HL-300型智能化里氏硬度計
HLM-100型里氏硬度計
TSY-100型探傷分選器
TS-2028C數字式超聲波探傷儀
WX-5型光譜鏡
EHS-Ⅰ硬度檢測自動分選系統
EHS-Ⅱ型鋼鐵硬度無損自動分選機
EHS-Ⅲ型軸承硬度在線無損自動分選機
EHS-Ⅳ型雙通道鋼鐵硬度無損檢測自動分選機
STY-2雙線4通道在線硬度、探傷自動無損檢測機
NDT抽油桿(管)材料、探傷無損檢測機
ETP-Ⅰ活塞銷圓體渦流檢測系統
ETP-Ⅱ軸承滾子渦流自動檢測系統
SEC-Ⅰ管棒渦流自動檢測系統
CWFY-3型鋼管材料在線無損自動分選機
PC-1000半自動熒光磁粉探傷裝置
探 頭


 

   ◆設備的主要功能
 HLM-100 PLUS intelligent Leeb hardness tester is designed for high measuring accuracy,wide hardness ranges,ease of operation,portability and high reliability.It can convert the Leeb hardness test results to HRB,HRC,HB,HV and HSD。The build-in mini-printer and RS-232C communication can be used convenient1y.It has been used at difficultly accessing locations or confined spaces especially.

   HLM-10O PLUS 智能化里氏硬度儀具有測量精度高、體積小、可靠性高、功能強大、使用方便、測量范圍寬等特點,可以將測量得到的里氏硬度值自動轉換成布、洛、維、肖等硬度值,通過一體化微型打印機迅速得到測試報告。專用的計算機通訊軟件能使分析工作至加直觀、高效。

Measuring Precision:Relative Error ±0.8%(750-800LD)
Measuring Ranges:
LD 200-900   HB30-650    HRC 20-68
HRB20-100    HV 80-940    HSD32.5-99.5
Large LCD Display with EL Backlight
Batch Testing and Check Limits Alarm
Up to 255 groups of Stored Results
Built-in Mini-printer
RS-232C Communication
Intelligent Charging Control
Testing for steel and cast stee1,alloy tool stee1,stainless stee1,grey cast iron,cast aluminum alloy, brass,bronze,copper,bearing stee1。
Operation Temperature: -10℃~45℃
Operation Voltage: 4.5~5.5V
Printer Paper: φ30mm×44mm
Dimensions: 224mm×84mm×38mm
Weight: 0.7Kg(main unit)
HLM-100 PLUS 技術指標
示值誤差:±0.8%(750-800HLD
測量及換算范圍:
HLD 200-900    HB 30-650    HRC 20-68
HRB 20-100    HV 80-940    HSD32.5-99.5
EL背光照明的大屏幕液晶顯示
批量檢測功能,可設置上下限報警
255組存貯數據空間
一體化微型打印機
RS-232C 計算機通信接口
智能化電池充電管理
測試材料種類:鋼和鑄鋼(低合金)、合金工具鋼、不銹鋼和耐熱鋼、灰口鑄鐵、球墨鑄鐵、鑄鋁合金、銅鋅合金(黃銅)、銅鋁合金、銅錫合金、純銅、軸承鋼
工作溫度: -10℃~45℃
工作電壓: 4.5~5.5V
打印紙: φ30mm×44mm
尺寸: 224mm×84mm×38mm
主機重量: 0.7Kg(main unit)
     
D type is a general-purpose probe with a broad applicability range.
DC Type is a shortened version of D type,good for testing in a limited space.
D+15 type is another modified version of D type with an extended probe in length of 15mm; suitable for testing slots and gear surfaces.
C type with low impacting energy for testing small,light,and thin specimens as well as the shallow surface of a hardened layer.
G type with high impacting energy for testing large,thick,or heavy specimens and some rough surfaces of cast or forged specimens.
D type device is the typically provided as a standard accessory;other types are optional and can be supplied at additional cost.
系列化沖擊裝置
D型為基本型,適用范圍很寬。
DC型為D型的超短改造型,適合空間高度受限的場合(長度86mm)。
D+15型為D型的加長改造型,它有一個15mm的細長端部,適合于溝槽、齒面的測試
C型的沖擊能量很小,專用于測試小、輕、薄部件及深度較淺的表面硬化層。
G型沖擊能量很大,專用于大、厚、重及表面較粗糙的鑄鍛件。
本機標準配置為D型沖擊裝置,其它沖擊裝置可根據需要選用。
 
The special supporting rings can be selected while the radius is less than 30mm.
當被測工件的曲率半徑小于30mm時,可選配異形支撐以保證測試精度。
 
Materials & Measuring range 材料和測試范圍
Impact device D、DC 沖擊裝置
No.
Materials
材料
LD
HRC
HRB
HB(30D2)
HSD
HV
1
steel and cast steel
鋼和鑄鋼(低合金)
300-900
20-68
38.4-99.5
80-647
32.5-99.5
80-940
2
alloy tool steel
合金工具鋼
300-840
20.4-67.1
80-898
3
stainless steel
不銹鋼和耐熱鋼
300-800
19.6-62.4
46.5-101.7
85-655
85-802
4
grey case iron
灰口鑄鐵
400-660
131-387
*Has not been heat treated
5
nodular cast iron
球墨鑄鐵
360-650
90-334
*Has not been heat treated
6
cast aluminum alloy
鑄鋁合金
200-560
10D2)30-160
7
brass
銅鋅合金(黃銅)
200-550
20.0-95.3
40-173
8
bronze
銅鋁銅錫合金
300-700
60-290
9
copper
純銅
200-690
60-290
10
bearing steel
軸承鋼
518-872
518-872
20.0-65.0
*中國標準洛氏(HRC)硬度塊采用此材料



無標題文檔
 
Copyright © 2003--2007  南京仙林無損檢測設備有限公司 All Rights Reserved       蘇ICP備13054511號

地址: 南京仙林大學城文瀾路99號(南京信息職業技術學院1號樓)
郵編:210046  電話: 025-85893489 85561639  傳真: 025-85577400 85893781

幸运农场怎么玩